title image

Smiley Re: SBD Partition
Zur Not neu erstellen:Recreate SBD Partition (10082213) Novell NetWare 6.0Novell NetWare 6.5Novell NetWare Cluster Services 1.7Novell NetWare Cluster Services 1.6SBD Partition and NSS Pools are being mirrored between the SAN deviceschangeDisk failure on one of the mirrored SAN Devices.To re-create the mirrored SBD partition do the following steps :- Down the cluster by issuing 'Cluster DOWN' and 'ULDNCS' commands.- Keep NetWare running on the first Cluster Node, and Down and Power Off the 2nd Cluster Node.- Delete the remaining Cluster partition with, for example, ConsoleOne or NSSMU (Notice the Device ID this SBD partition is currently on for the re-creation in a later step)- On the first Node load the following NLMs : CLSTRLIB.NLM, VLL.NLM, SBDLIB.NLM (In this order !)- Run 'SBD Install' on the server console (The system will now do a check for the SBD partition availability on the shared storage, should not find it as have we just deleted it, and tell you to run the SBD install command again)- Run 'SBD Install' again and choose the First Device for the Mirrored SBD partition (Just press the desired number which is listed before the Device Number)- Choose a valid number for the Second device of the Mirrored SBD partition.After the creation of both SBD partitions you should now see the following message on the server console to confirm we have succesfully re-created a mirrored SBD partition: 4-17-2003 11:24:56 am: SERVER-5.60-1580 [nmID=B001A] All mirrored objects on this system are synchronized.

geschrieben von




Beitrag anfügen